Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Repair in Brighton, NY
We provide independent Ghost Controls gate repair and service across Brighton, NY. What makes our Ghost Controls work here different is that we diagnose around Brighton’s real conditions: compact, fully fenced lots where owner-installed solar swing kits often sit on vintage cedar and iron gates, and a yearly freeze-thaw and road-salt cycle that attacks low-voltage hardware before the board ever fails. We connect homeowners with vetted local gate pros who work on Ghost Controls equipment, so the repair is driven by what your operator actually needs.
Call (866) 942-8010. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Brighton Residents Choose Us for Ghost Controls Service
We’re gate-only specialists. That focus means every diagnostic call in Brighton is about a gate, not a fence, a deck, or a handyman list. Ghost Controls solar and low-voltage swing and slide operators are a regular part of our work, from AXO1 and AXO2 single-swing kits to ARB dual-swing setups and HSD slide operators.
We’re an independent service provider. We’re not a Ghost Controls dealer, not a warranty channel, and not affiliated with or authorized by the manufacturer. That independence matters in Brighton: we aren’t steering you toward a part to hit a quota. We use Ghost Controls boards, arms, batteries and receivers where they’re still current, and quality aftermarket batteries, solar panels and safety edges where OEM parts are discontinued or priced out of reason.
Our technicians have up to 10 years of experience. Scheduling is straightforward. We answer 24/7, and we dispatch from 7am to 7pm, Sunday through Friday.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Common Ghost Controls Gate Repair Problems We Solve in Brighton
- Control board and battery-bank failure after freeze-thaw cycling. Ghost Controls low-voltage solar units mounted in unheated Brighton garages or along shaded fence lines lose charge through short winter days. Repeated deep discharge kills AGM batteries and eventually the board, which is why a dead operator in January often traces back to the battery, not the control logic.
- Salt-spray corrosion on terminal blocks and safety-eye wiring. After a Brighton snowplow pass, the salt spray thrown onto driveways along the Elmwood and East Avenue corridors attacks low-voltage connections faster than the gate steel. Corroded safety photo-eye wiring shows up as a gate that opens halfway and reverses.
- Post heave and arm binding on vintage swing gates. Frost heave twists 30 to 60 year old posts and hinges, so a Ghost Controls arm strains against a gate that no longer swings true. The operator trips out or burns a fuse trying to do what the gate hardware won’t.
- Discontinued or superseded accessories. Old remotes, keypads and receiver modules that won’t pair with a current Ghost Controls board turn into a receiver or keypad swap rather than a straight replacement. We identify what’s compatible before anything is ordered.
- Solar panel and charge-controller degradation. Summer irrigation overspray and pollen on compact Brighton lots coat panels and controllers, producing intermittent “low battery” faults that look like a board failure but aren’t. Cleaning and testing the charging side comes before any board swap.
Ghost Controls Service in Brighton: What Local Conditions Mean for Your Equipment
Brighton’s 14618 lots are compact and fully fenced, and that shapes almost every Ghost Controls call we see here. A large share of Ghost Controls installs across Brighton are owner-installed AXO and ARB solar kits on gates the homeowner already owned. So the operator is often working fine, but it was mounted years ago to a post that frost heave has since moved. On a gate along the East Avenue corridor, a heavy 1920s or 1960s cedar or iron gate can look perfectly aligned in July and bind in March, because a winter of freeze-thaw has tipped the post out of plumb. The real fix on many spring calls is post-and-hinge correction, not operator replacement. That’s why we check plumb, hinge bind and battery voltage before we ever touch the board. If the gate can be made to swing freely, a sound low-voltage Ghost Controls operator usually only needs a reset, a clean and reseal of corroded terminals, or a fresh battery. Replace the operator only when the board and arm are both gone or the gate itself can’t be corrected.
Ghost Controls Models & Products We Service in Brighton
We service the kinds of Ghost Controls equipment that turn up on Brighton gates: AXO1 and AXO2 single-swing solar kits, ARB1 and ARB2 dual-swing kits, and HSD2 and HSD2K slide gate operators. We also handle the accessory side, including keypads, safety photo-eyes, remote transmitters, receiver modules, solar panels and charge controllers.
Parts choice is always about fit, not inventory. Where a Ghost Controls board, motor or receiver is still current, we use it. Where an OEM part is discontinued or priced well above a reliable equivalent, we use a quality aftermarket battery, panel or safety edge that fits the system and keeps it working. We don’t claim to be a Ghost Controls dealer or to stock OEM parts, and we don’t say we’re factory-trained. We repair, install and service the equipment as an independent shop, and we tell you plainly which option makes more sense for your gate.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Service Pricing in Brighton
Gate repair in Brighton runs at mixed rates of roughly $85 to $125 per hour, and Ghost Controls work usually falls within that band depending on what’s involved. A simple reset, terminal cleaning and battery test sits at the low end; a board swap, an arm replacement, or post-and-hinge correction on a heaved vintage gate pushes toward the higher hourly rate because it takes more time and more hardware.
- Diagnostic and reset work: the lowest-cost category, checking plumb, hinge bind, voltage and terminals first.
- Battery and charging-side repair: moderate, since batteries and controllers are usually straightforward swaps once diagnosed.
- Board, motor or arm replacement: toward the top of the range, including the part itself.
- Post and hinge correction: hourly-rated and variable, since it depends on how far the post has moved.
The estimate is free, the price is set per job by the written estimate, and we agree the number with you before any work starts. Call (866) 942-8010 for an exact quote on your Ghost Controls gate in Brighton.
Serving Brighton, NY – Our Local Coverage Area
We serve Brighton and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Ghost Controls Gate Repair in Brighton
In most Brighton cases, it’s the battery first. Short winter days and deep-discharge cycling drain AGM batteries long before the control board actually fails. We test voltage and the charging side before touching the board. Call (866) 942-8010 and we’ll book a test.
Yes, provided the gate is corrected so it swings freely. The operator isn’t the problem on a sagging vintage cedar gate; the post and hinges are. We realign or reset the gate and hinge hardware first, then confirm the Ghost Controls arm has a true swing to work against. If the gate can’t be made to move cleanly, we’ll tell you that too.
We don’t stock parts as a dealer, but we can source and fit compatible transmitters, keypads and receiver modules for older Ghost Controls systems, including setups where the original accessory no longer pairs with a current board. We identify the right match before ordering. Call (866) 942-8010 to walk through what you have.
Spring faults on Brighton slide operators usually come from the two things winter leaves behind: salt-spray corrosion on low-voltage terminals and safety-eye wiring, and a post or track that frost heave has shifted out of true. A qualified local pro inspects both before replacing any part. Call (866) 942-8010 for an on-site look.
A healthy Ghost Controls battery backup holds through a typical short outage, but its real capacity depends on battery condition, temperature, and how often the gate cycles. A battery past its prime will fade quickly in cold weather. We test the battery and charging system so you know what to expect. Call (866) 942-8010 for a free estimate.
Service Areas Near Brighton
We also connect homeowners with Ghost Controls service in Rochester and Irondequoit, through Gates and North Gates, and out to Greece. If you’re near the East Rochester line or by the Rochester Institute of Technology, our Brighton coverage reaches you. Independence matters here too, so when you read about our Ghost Controls expertise, know we’re not a dealer or warranty channel.
Book Your Ghost Controls Service in Brighton Today
A Ghost Controls gate that won’t complete a cycle needs a real diagnosis, not a guess. We handle motor repair, battery backup, and hinge and post repair across Brighton, and same-day service is often available. Call (866) 942-8010. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. The estimate is free, the price is set per job by the written estimate, and we agree it before any work starts.
Written by the team at Rochester Gate Repair.