Sliding driveway gates
Wrought iron
Wood & steel frame
Farm & ranch
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Gates
If your gate drags, won’t latch, or the operator has stopped responding, we can help. We’re Rochester Gate Repair, and we work on gates throughout Gates, from the tight residential streets off Buffalo Road to the small commercial lots along Spencerport Road. We know this town’s gates because we know what this town does to them: deep frost, heavy commuter and truck traffic, and tight lots where a gate has to swing clean every single time. Our technicians have up to 10 years of experience, we’re licensed and insured, and estimates are free. Call (866) 942-8010. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Why Gates Homeowners Call Rochester Gate Repair for Gate Repair
Gates is a first-ring Rochester suburb where the housing stock runs mostly post-WWII through 1970s, and a lot of the gates we see are original to the fence. Many of them are welded steel, chain-link, or aging ornamental iron on small commercial properties. That history matters more than any sales pitch. We’re gate-only specialists: repair, electric gate repair, and installation are the only things we do, so we’re not splitting our attention across fencing, decks, or general handyman work.
We’re also familiar with the systems people here actually own. Operators from LiftMaster, FAAC, BFT, and Linear show up on Gates gates regularly, and we work on all of them. That means we diagnose by system, not by guesswork, and we can often tell you what’s wrong before anyone touches a wrench. We handle both residential swing and slide gates and commercial access systems, so homeowners near North Gates and property managers along the plowed corridors get the same level of expertise.
Response to Gates is straightforward. Call and we can usually get a technician out fast, with same-day service available when the schedule allows. We quote and agree the price before any work starts, so you know the number before we touch the gate. Estimates are free.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Iron Gate Repair in Gates
Iron Gate Repair in Gates is mostly about correcting what time, settled footings, and road salt have done to older ornamental iron and welded-steel gates. On compact post-war lots in town, these gates were hung decades ago and many have slowly racked out of square, with gates that scrape the ground, bind at the hinges, or no longer line up with the latch. The job usually involves checking the posts first, then the panel, then the hinges and hardware. Most iron gate repairs in Gates run roughly $150 to $450 per gate for hinge, alignment, and rust treatment work, and a free written estimate gives you the real number.
Rusted Hinges and Worn Hardware
Original iron gates on Gates properties often have hinges that have corroded to the point where they bind instead of pivoting cleanly. We replace or free up the hinge, then check the gate is hanging true. Worn hardware usually explains the sag, but it’s not always the whole story, and we check the posts before we call it done.
Rust Prep and Weld Repairs
Road-salt splash along the plowed corridors accelerates corrosion on old iron, especially near the bottom rail and hinges. We clean back rust and weld or repair deteriorated joints where they’ve cracked. Light surface rust we treat on site; heavy structural loss sometimes means a new panel makes more sense, and we’ll tell you which.
Sliding Gate Repair in Gates
Sliding Gate Repair in Gates tends to focus on older track-mounted gates and the operators that drive them, especially on the small commercial lots that see heavy daily truck and commuter traffic along the Buffalo Road and Spencerport Road corridors. Worn rack and pinion, corroded rollers, and out-of-level track are the usual culprits, and the fix is often to re-level the track and replace the operator’s drive gear rather than the whole gate. Most sliding gate repairs here run roughly $200 to $600 per gate depending on what the operator and hardware need, with a written estimate agreed before any work starts.
Track, Rollers, and Rack
Sliding gates bind when the track has shifted or the rollers have worn flat. We check the track first, since a gate that’s hard to move manually is usually a track and roller problem, not a motor problem. Replacing rollers and re-leveling the track resolves most of what we see.
Operator Drive Gear and Board Work
On automated Gates gates, worn drive gear and tired control boards keep operators from moving the gate smoothly. We diagnose at the board and motor level before recommending parts. Older operators can often be repaired; when they can’t, we explain the retrofit versus replacement choice plainly. If you want to know more about the umbrella of work we do, our gate repair team covers every category this page touches.
Trusted Brands We Service in Gates
We service operators from LiftMaster, FAAC, BFT, and Linear, plus the broader range of systems we work on across Gates. We don’t claim local parts stock, but we can usually source what’s needed quickly and get your gate back to working. If you already own a named brand, tell us which one when you call: it helps us arrive prepared and shortens the diagnostic visit. From residential openers to commercial access-control-grade systems, we work on your brand and we’ll tell you honestly whether to repair or replace.
Common Gate Repair Problems We See in Gates Homes
- Frost-heaved hinge posts. Western New York winters heave posts out of plumb and rack gates out of square. Spring call spikes in Gates come from gates that no longer latch after the thaw, and resetting and re-plumbing the post is usually the real fix.
- Rusted hinges and worn rollers. Original chain-link and welded-steel gates are common on Gates’ older compact lots. Worn hardware binds and racks the gate, so we replace hinges and rollers and re-align the panel.
- Set footings on tight driveways. Narrow lots and mature street trees force gate repairs to focus on re-hanging and re-aligning existing gates rather than widening openings. Post settlement correction is the core of the work.
- Corroded operator components. Older commercial operators along plowed corridors often have control boards, loop detectors, and safety photocells that have corroded. We diagnose those parts and retrofit modern safety features where the operator supports them.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Repair in Gates, NY
Pricing for gate repair in Gates, NY usually runs $150 to $450 for iron and swing gate repair and $200 to $600 for sliding gate work, with operator diagnostics and board-level electric gate repair typically in the $200 to $750 range depending on the system. What moves the number: whether the post footing needs resetting, whether the job is hinge and hardware alone, and whether the operator needs a motor or control board. A settled post costs more than a hinge, because correcting it is the real work. Every repair is quoted and agreed before any work starts, and the free written estimate sets the final price. Call (866) 942-8010 for a number that fits your gate.
We Also Serve Cities Near Gates
We work across Gates and the surrounding towns, including North Gates, Rochester, Greece, and Spencerport. If your gate sits just over the line in any of these, we can help. We know this part of Monroe County and the frost, salt, and traffic it puts on gates. Call (866) 942-8010 and tell us where you are.
Serving Gates, NY – Our Local Coverage Area
We serve Gates and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Gates
A settled or tilted hinge post is the usual cause, not a failed hinge. Frost heave lifts one side of the post each winter, and the gate racks out of plumb, so a qualified tech resets and re-plumbs the footing before touching the hinge. Call (866) 942-8010 for a free estimate on post resetting in Gates.
Often yes, if the operator’s control board supports the addition. Modern safety photocells, loop detectors, and reversing edges can frequently be fitted to an older electric gate operator, but the decision comes down to whether the board is compatible and the motor still has life in it. We diagnose at the board level and tell you honestly whether retrofit or replacement is the cheaper answer. Call (866) 942-8010 for a free estimate.
Usually not. A sliding gate that’s hard to move is typically a worn roller, an out-of-level track, or a worn drive gear, all of which can be repaired without replacing the gate. We check the track and rollers first, because the gate panel itself is rarely the problem. Call (866) 942-8010 for a free estimate on sliding gate repair in Gates.
We service LiftMaster, FAAC, BFT, Linear, and the broader range of documented brands we work on, including systems common on residential and commercial gates across Gates. Tell us the brand when you call and we’ll arrive prepared to diagnose by system. Call (866) 942-8010 for a free estimate.
Repair is usually cheaper when the gate panel and hardware are sound and only the footing has moved. A reset and re-plumbed post is far less than a new gate, and it restores the gate you already have. Replacement makes sense when the panel has structural rust loss or the operator is beyond sensible repair, and we’ll give you the comparison in the written estimate. Call (866) 942-8010 for a free estimate.
Call Rochester Gate Repair for Gate Repair in Gates
Whether it’s a swing gate that won’t latch, a sliding gate that binds, or an older operator that needs board work or a retrofit, we can diagnose it and tell you plainly whether to repair or replace. Estimates are free, the price is quoted and agreed before any work starts, and we’re licensed and insured. Call (866) 942-8010. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Rochester Gate Repair.