Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Irondequoit
If your driveway gate is dragging, leaning, or refusing to latch after another lake-effect winter, you’re in the right place. We repair gates throughout Irondequoit, from the older lake-adjacent streets of 14622 to the newer developments where builder-grade operators are starting to show their limits. We know what this town does to gates: heavy snow, road-salt spray, and ground that heaves and settles through repeated freeze-thaw cycles. That means we diagnose by system, not by guesswork, and we tell you honestly whether your gate needs repair or replacement. Call (866) 942-8010 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Why Irondequoit Homeowners Call Rochester Gate Repair for Gate Repair
We’re gate-only specialists. Repair, electric gate repair, and installation are the only things we do, so every part and every diagnostic step points at the same problem instead of being spread across unrelated trades. That focus shows up in how fast we get to the actual cause of a dragging gate or a dead operator.
Irondequoit customers reach us repeatedly because we work on the brand they already own. Our technicians are familiar with LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems, spanning residential openers and commercial access control. When you call with a Mighty Mule that won’t reverse or a DoorKing entry system acting up, we’re not learning your equipment on your time.
Response time to Irondequoit is a short hop from our Rochester service area, and we plan routes around the town’s main corridors so we’re not guessing at travel. Our technicians have up to 10 years of experience, and that experience is what tells us whether a sagging swing gate needs a post reset or a hinge replacement. We also handle the power and control work that most general fence companies won’t touch. That’s the difference between a specialist and a handyman who happens to own a wrench set.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Commercial Gate Repair in Irondequoit
Commercial Gate Repair in Irondequoit covers the automated vehicle and pedestrian gates that property managers and small businesses rely on for access control, and it’s a job for someone who understands board-level diagnostics, not just mechanical fixes. When an HOA entrance gate stalls, a DoorKing access system loses its call box, or a slide gate stops reversing, residents and tenants are locked out or stuck waiting. That’s where our electric and automated repair expertise earns its keep: we work on the operator board, the motor, the sensors, and the safety edges as one system.
Typical commercial gate repair in Irondequoit runs roughly $300 to $900 for diagnostics plus parts, depending on whether we’re replacing a control board, a motor, or safety sensors, with the written estimate setting the final price. The estimate is free and agreed before any work starts.
Access Control and Operator Diagnostics
We trace the fault through the operator, the control board, and the access hardware instead of replacing parts until something works. That approach matters most when a commercial gate is cycling correctly but failing to open for a valid credential.
Safety Edge and Loop Detector Service
Entrapment protection on a commercial gate isn’t optional, and a failing safety edge or loop detector is a liability issue, not a convenience one. We test and repair those components as part of the same visit so the gate doesn’t pass inspection one day and fail the next.
Iron Gate Repair in Irondequoit
Iron Gate Repair in Irondequoit usually means salvaging a steel or ornamental gate that’s been fighting lake-effect moisture and road-salt spray for decades, rather than swapping it out. The older homes on the lake-adjacent streets of 14622 still carry original steel driveway gates and iron pedestrian gates, and the failure mode is almost always at the joints: rusted hinges, seized latches, and weld seams that have started to give. We assess whether a gate is worth saving, then repair the hardware, weld the frame back to strength, and realign it so it swings clean again.
Iron gate repair in Irondequoit typically runs $250 to $700 depending on whether we’re doing hinge and latch replacement, weld and rust repair, or a full realignment, with the written estimate fixing the final number. We quote and agree the price before any work begins, so there are no surprises on the invoice.
Weld and Rust Repair
Rust eats welds from the inside out, so we clean back the corrosion before we weld, not over it. That’s what keeps a repaired joint holding through another winter instead of cracking open in the spring.
Hinge, Post, and Realignment Work
A gate that won’t close is often a post problem wearing a gate costume. We check the hinge post for plumb and the footing for movement before we touch the gate leaf, because realigning a gate on a bad post only buys you one season.
Trusted Brands We Service in Irondequoit
We service the gate brands Irondequoit homeowners and property managers actually own. That includes Ghost Controls and Mighty Mule for residential driveway operators, Elite for gate hardware, and DoorKing for commercial and access-control systems, alongside LiftMaster, FAAC, BFT, Linear, and Viking. Because we diagnose by system, we don’t need to guess at what’s failing. We don’t claim to stock parts on a truck; what we do is identify the fault accurately and source what’s needed to get your gate working again, with turnaround built around your schedule. If you own one of these brands and it’s misbehaving, we’ve likely worked on it before.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Irondequoit Homes
- Frost-heaved, shallow post footings. Irondequoit’s repeated freeze-thaw cycles push shallow gate posts up and out of plumb, so a swing gate drags on the ground and latches miss season after season. The fix is a proper footing reset, not another shim.
- Hinges and latches rusted by winter road-salt spray. Salt spray thrown by plows eats metal hardware on gates near the lake, and once a hinge seizes, the gate load shifts onto the post. We replace the hardware before it takes the frame with it.
- Wood panels swollen and delaminated by lake-effect moisture. Decades-old wood gates on mid-century homes absorb moisture, swell, and split at the joints. We repair what’s sound and tell you honestly when a panel is past saving.
- Undersized builder-grade operators in newer developments. Operators installed on new-build gates are often undersized for the gate’s weight and never paired with a loop detector or safety photocell, so they short-cycle, stall, or fail outright. Right-sizing the operator and adding proper entrapment protection fixes it.
Pricing for Gate Repair in Irondequoit, NY
Gate repair pricing in Irondequoit is set per job by the written estimate, and the estimate is free. A typical hinge and post repair runs $250 to $600, a sag correction with post footing reset runs $350 to $800, and electric or automated gate repair usually lands between $300 and $900 depending on whether we’re replacing a control board, a motor, or safety sensors. What moves the number is the depth of the footing, whether the gate needs realignment, and whether parts have to be sourced for a specific brand. If your manual gate needs automation and no power or conduit run exists at the post, that retrofit trenching and circuit work is quoted separately. We give you the number in writing and you approve it before we start. Call (866) 942-8010 to book a free estimate.
We Also Serve Cities Near Irondequoit
Irondequoit is one of the towns we serve across the greater Rochester area, and our Irondequoit work runs alongside jobs in Rochester, Webster, Brighton, and Gates. If you’re just over the town line, the same gate-only service applies. Our gate repair team treats every call the same way: diagnose the system, quote the job in writing, then fix it right. Call (866) 942-8010 wherever you are in the area.
Serving Irondequoit, NY – Our Local Coverage Area
We serve Irondequoit and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Irondequoit
It’s almost always the post. On the older lake-adjacent streets of 14622, plow spray and drifting snow pack against driveway gates all winter, and what gives way first is the shallow post footing, leaving frost-heaved hinge posts and torn-loose hinges rather than a broken gate panel. A typical Irondequoit repair starts with a gate that drags or won’t latch after winter: the hinge post has heaved out of its footing, and the wood panel has swollen and delaminated from lake-effect moisture and salt spray. A qualified pro resets and re-pours the footing, does a proper sag correction at the hinge post instead of patching the panel, then replaces rusted hinges and latches before readjusting the gate. Call (866) 942-8010 for a free estimate.
Yes, and it’s one of the most common requests we get in Irondequoit’s newer developments. The catch is usually power: most manual gates were installed with no conduit or circuit run at the post, so before any operator can go in, the run has to be planned around a new trench and a dedicated circuit. Once power is there, we can fit a residential operator matched to the gate’s weight and add the safety photocell and keypad entry. That’s a measured, scheduled job rather than a same-day fix, so call (866) 942-8010 for a free on-site estimate and a written price.
Road-salt spray is the culprit. Plows throw salt-laden slush onto gates along the lake-adjacent streets, and repeated freeze-thaw keeps the hardware wet and corroding through the winter. Once a hinge seizes, the gate’s weight shifts onto the post and the damage cascades. Replacing rusted hardware with proper hardware and keeping an eye on it each spring keeps a gate swinging. Call (866) 942-8010 for an exact quote on your gate – estimates are free.
Yes. Any automated gate should have entrapment protection, typically a safety photocell or safety edge plus a loop detector on the approach, so the gate stops or reverses if something is in its path. Builder-grade operators in newer Irondequoit developments often went in without these, which is why we check for them on every electric gate repair call and add what’s missing. Call (866) 942-8010 to have your operator checked – estimates are free.
We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems, from residential openers to commercial access control. That range means a homeowner with a Mighty Mule and a property manager with a DoorKing call get the same specialist service. We diagnose by system so we’re not guessing at your hardware. To find out what’s wrong with your gate, call (866) 942-8010. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Whatever brand is on your gate and whatever the winter did to it, we’ll come out, diagnose the actual problem, and give you a written price before any work starts. Call (866) 942-8010 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, and we’re closed Saturday.
Written by the team at Rochester Gate Repair.