Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Rochester, NY
If you’re planning a new gate for a Rochester property, the job here is shaped by two things: the age of the housing and the lake-effect winters coming off Lake Ontario. Much of Rochester’s core was built between the 1900s and the 1940s, so a new gate usually means working around brick piers, narrow side yards, and concrete aprons that have heaved over many freeze-thaw cycles. New driveway or yard gates have to be measured, ordered and scheduled, and we give you a written price before anything gets ordered. Call (866) 942-8010 for a free on-site estimate.
Why Rochester Homes Are Different
Rochester’s gate problems don’t look like the ones in newer subdivisions. In the South Wedge and Maplewood, gates hang on century-old masonry piers along narrow side yards, so the work often starts with patching crumbling mortar or resetting hinges in aging brick rather than swapping out a whole unit. The outer neighborhoods carry a different mix: chain-link and steel gates from mid-century suburban tracts, many of them original. Add lake-effect snow and repeated winter freeze-thaw, and gates here fail at the hinge and at the post foot. Wood swells and splits, hinges seize, and post feet heave in frost. That’s why spring tune-ups and fall winterizing are recurring needs in Rochester rather than one-time repairs. The classic local failure is a sagging gate dragging on an uneven, heaved concrete apron after a cold winter, and the fix is usually re-leveling or shimming the post, not just adjusting the hinge.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Rochester Services
Most calls we take in Rochester fall into two groups: gates that have stopped working and gates that need power and controls checked. Here’s what each one involves.
Gate Repair in Rochester
Mechanical gate repair in Rochester usually means hinge, post and latch work. On the older urban lots, that means patching mortar in a brick pier or re-setting a hinge that has pulled loose from aging masonry, since replacing the whole unit often isn’t necessary. We look at how the gate sits on the ground as much as how it swings, because a postwar concrete apron that has heaved will keep dragging a gate no matter how many times the hinge gets adjusted. We work on your brand and tell you plainly whether repair or replacement makes sense. For details on Gate Repair in Rochester, see the dedicated page.
Electric Gate Repair in Rochester
Automated gates fail in specific ways: a control board that won’t cycle, a motor that stalls halfway, safety edges that stop reading, or a keypad that has lost its codes. We diagnose by system rather than by guesswork, which matters when the operator is a brand with its own diagnostic behavior. Wiring and power at the operator are the dangerous part of this work, so we handle that side ourselves and don’t recommend poking at it without training. Full detail lives on our Electric Gate Repair in Rochester page.
Gate Installation in Rochester
New gate installation in Rochester starts with the site, not the catalog. Between the age of the housing stock and the freeze-thaw cycles coming off Lake Ontario, a gate here has to be planned around brick piers, narrow side yards and concrete that moves with the seasons. We handle Gate Installation as a measured, scheduled job: we come out, measure, talk through swing or slide, then give you a written price before anything is ordered.
Driveway Gate Installation
Signs you need it
You’re adding a driveway gate to a detached garage at the end of a narrow Rochester driveway, or replacing a rusted-out mid-century gate that no longer lines up with the apron.
What it costs in Rochester
A new driveway gate installation typically runs $2,800 to $7,500 depending on width, material and whether an operator is included, and the written estimate sets the final price.
How we do it
We measure the opening and check the apron and post line, set posts to proper footing depth below frost movement, hang the gate, then test the swing clear of the ground before we leave.
Automatic Gate Installation
Signs you need it
You want the gate to open without leaving the car, or the operator on your existing gate has failed for the last time and a new system makes more sense than another board swap.
What it costs in Rochester
Automatic gate installation typically runs $1,600 to $5,200, and the written estimate sets the final price once we’ve seen the gate and the power location.
How we do it
We confirm the power run, mount the operator to the gate and post, set the limits and force, wire the safety edges, then cycle the gate repeatedly to check it stops and reverses correctly.
What Gate Installation Costs in Rochester
These are typical ranges for Rochester, not quotes. The written estimate after we measure is what sets the price.
| Item | Typical range in Rochester |
|---|---|
| Automatic gate installation | $1,600 – $5,200 |
| Driveway gate installation | $2,800 – $7,500 |
| Electric gate installation | $2,200 – $8,500 |
Can you install a gate on an old brick pier in Rochester?
Yes, when the pier is sound enough to hold the hardware. We inspect the mortar and brick first. If it’s crumbling, we recommend repointing the pier before hanging anything new, and the written estimate covers that part separately.
Do I need a permit for a new gate in Rochester?
Often yes for a new gate or an installation that changes the fence line, so ask the city’s building department before we order materials. We’ll tell you what the installation involves so you know what to ask about.
Brands We Service in Rochester
We’re experienced with the systems that show up most in Rochester: LiftMaster, FAAC, BFT and Linear, from residential openers to access-control-grade operators. We don’t claim to stock brand parts locally, so turnaround depends on the part and the job. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Rochester, NY
Typical ranges for the work we quote in Rochester:
| Service | Typical range in Rochester |
|---|---|
| Automatic gate installation | $1,600 – $5,200 |
| Driveway gate installation | $2,800 – $7,500 |
| Electric gate installation | $2,200 – $8,500 |
| Gate repair | $180 – $650 |
| Electric gate repair | $220 – $850 |
| Hinge and post repair | $150 – $500 |
| Control board replacement | $250 – $700 |
| Operator motor replacement | $400 – $1,200 |
| Safety edge and sensor repair | $180 – $450 |
| Keypad and access control repair | $200 – $600 |
What pushes price up in Rochester is the state of the pier and the apron: a brick pier that needs repointing or a heaving concrete slab adds time versus a gate on a sound post. Every price is quoted and agreed in writing before any work starts, so there are no surprises when the invoice arrives.
Neighborhoods We Serve in Rochester
We cover the older urban core and the outer neighborhoods, where the gate types and the ground underneath them vary block by block. In the South Wedge and Maplewood, most of the work is brick-pier repairs and hinge resets. In the outer tracts, it’s often mid-century chain-link and steel gates that need adjustment after a winter of frost heave. For most of Rochester, fast dispatch from 7am to 7pm gets a technician to you the same day on repair calls.
- South Wedge
- Maplewood
- Park Avenue
- Charlotte
- North Winton Village
Service Area – Cities Near Rochester
We also take gate work in the towns and villages around Rochester. In Gates, NY and North Gates, NY, the housing runs newer than the city core, so hinge and post repairs tend to be less about old masonry. Over in Greece, NY and Irondequoit, NY, many gates sit on open lots where wind and freeze-thaw work the posts harder. If you’re just outside the city line, call and we’ll confirm coverage.
Serving Rochester, NY – Our Local Coverage Area
We serve Rochester and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Company in Rochester
For repair calls in Rochester, fast dispatch from 7am to 7pm usually means a technician the same day. We answer 24/7, and a call outside dispatch hours is booked into the next opening, Sunday through Friday. Installation jobs are measured and scheduled.
We don’t pull permits for you. For a new gate or a change to a fence line, ask the city’s building department what’s required, and check with your HOA if you have one. We’ll tell you what the installation involves so you know what to ask.
We cover Rochester itself plus the surrounding towns, including Gates, North Gates, Greece and Irondequoit. If your property is further out, call (866) 942-8010 and we’ll confirm whether we can get a technician to you.
Whether you need a new gate measured and priced or a failing one looked at, call (866) 942-8010 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. The price is quoted and agreed before any work starts.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within 30-60 min.
- 4You approve before work beginsNothing starts until you say go.
What Rochester Customers Say
"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
- Robert Delaney"Repair is holding. He was quite a bit later than the window I was given, and nobody called me about it, I had to call them. The work itself was done well once he got here."
- Oscar Torres"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, swapped it, and we were moving cars again in under an hour."
- Darius Ingram