Sliding driveway gates
Wrought iron
Wood & steel frame
Farm & ranch
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Gates, NY
Gate installation in Gates is mostly restoration work in disguise. This is a first-ring suburb where lots were laid out tight after the war, so a new gate has to fit around mature street trees, narrow side yards, and fence lines that have already been pushed out of square by decades of freeze-thaw. We’re a gate-only company, which means every call we take in Gates is about a gate: hanging a new drive gate on posts that are actually plumb, or replacing a rusted operator on a small commercial lot along Buffalo Road. If your gate no longer latches or your operator has quit, call (866) 942-8010 for a free estimate.
Why Gates Homes Are Different
Western New York winters do something specific to Gates. Deep frost under a compact lot heaves gate posts a little more each season, and the repeated thaw-and-refreeze in early spring racks older steel gates out of square. That’s why our spring calls in Gates spike the way they do: gates that won’t latch, gates that drag, gates that suddenly swing crooked. The fix is rarely just adjusting hinges. Technicians here routinely reset and re-plumb posts, then re-hang the gate off the corrected line.
The housing stock shapes the work too. Most Gates homes are post-WWII through 1970s single-family houses on small lots, with a lot of original chain-link and welded-steel fences still standing. Many gates are original to the fence, so you’re working with settled posts, rusted hinges, and rollers that have worn flat. Along the plowed corridors, road-salt splash speeds up hinge and operator corrosion. On the commercial side, small lots off Buffalo Road and Spencerport Road run gates hard against daily truck and commuter traffic, and that wear shows up in the operator, not the gate panel. Our technicians have up to 10 years of experience with exactly this pattern.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Gates Services
Two jobs come up again and again on Gates properties: getting an existing gate swinging and latching again, and getting a tired operator to run reliably through another winter.
Gate Repair in Gates
In Gates, repair work is dominated by older steel and chain-link drive and walk gates that need to be re-hung and re-aligned rather than replaced. Frost-heaved posts, sagging hinges, and worn rollers are the usual culprits, and salt splash along the plowed roads eats at hinges faster here than on sheltered lots. We diagnose what actually moved before we touch anything, so the fix holds through the next thaw. If your gate has drifted out of true, start with gate repair in Gates and we’ll tell you plainly whether it’s a repair or a replacement that makes sense.
Electric Gate Repair in Gates
Operator problems on Gates commercial lots tend to be wear-driven. A gate on a small Buffalo Road property that cycles dozens of times a day will wear out a motor, a control board, or a safety edge long before the gate panel gives out. We work on the systems that run these gates, including LiftMaster and FAAC operators, and we test the full cycle rather than just the symptom you called about. For board-level and motor diagnostics, see our electric gate repair in Gates.
Gate Installation in Gates
Installing a gate in Gates means building around what’s already there. The lots are compact, the fence lines are old, and the ground moves every winter. Whether you want a driveway gate, a walk gate, or a powered slider on a commercial lot, the job starts with the posts, because a gate hung on a heaving post will never stay true no matter how good the hardware is. We handle the full scope through Gate Installation, from measuring the opening to setting posts to proper footing depth to hanging the panel and setting the operator.
Because most Gates properties are post-WWII through 1970s homes on tight lots, we spend real time on layout. A gate has to clear the mature street trees, sit inside the property line, and swing or slide without fouling a fence that’s already out of square. If the existing fence is original chain-link or welded steel, we match the new gate to the line that’s actually there, not the line it was drawn on. On commercial lots along Buffalo Road and Spencerport Road, we plan for daily truck and commuter traffic, which means heavier hardware and an operator rated for the cycle count.
Driveway Gate Installation
Signs you need it
Your existing drive gate has settled posts, rusted hinges, and worn rollers that no longer hold an adjustment, or the fence line it’s attached to has racked past the point of a reliable hang.
What it costs in Gates
Driveway gate installation in Gates typically runs $1,800-$5,500 for a manual gate and $3,500-$9,000 or more once an operator is added, with the written estimate setting the final price.
How we do it
We measure the opening and check the fence line, set posts to proper footing depth below the frost-affected soil, hang the gate plumb and square, then test the full swing and latch before we call it done.
Electric Gate Installation
Signs you need it
You’re adding a powered driveway gate for security or access control, or an existing manual gate is being brought into daily automated use and needs a proper operator.
What it costs in Gates
Electric gate installation in Gates typically runs $3,500-$9,000 depending on the operator, the gate weight, and the power run, with the written estimate setting the final price.
How we do it
We plan the power run and safety edges first, mount and set the operator to the gate’s travel, wire the controls and safety devices, then cycle-test the whole system and walk you through the limits and stops.
What Gate Installation Costs in Gates
| Item | Typical range in Gates |
|---|---|
| Manual driveway gate installation | $1,800 – $5,500 |
| Electric gate installation | $3,500 – $9,000 |
| Operator replacement on existing gate | $900 – $2,500 |
Can you install a gate on an old fence line in Gates?
Yes, and that’s the normal case here. On compact Gates lots we work to the fence line as it actually sits, resetting or re-plumbing posts so the new gate hangs true rather than fighting a racked fence.
Do you handle the power run and the safety edges?
We do. A powered gate installation in Gates includes planning the power run to the operator and fitting the safety edges that stop the gate on contact, and we test both before we leave.
Brands We Service in Gates
We work on your brand, not just whatever a single dealer sells. Our technicians are familiar with LiftMaster, FAAC, BFT, and Linear systems, from residential openers to commercial access-control-grade operators, so we diagnose by system rather than guessing at the symptom. Turnaround on parts varies by system and gate weight, and we give you a realistic window up front. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Gates, NY
| Service | Typical range in Gates |
|---|---|
| Manual driveway gate installation | $1,800 – $5,500 |
| Electric gate installation | $3,500 – $9,000 |
| Operator replacement on existing gate | $900 – $2,500 |
| Gate repair (realignment, hinges, rollers) | $180 – $650 |
| Post reset and re-plumb | $250 – $900 |
| Electric gate diagnostics and board repair | $150 – $700 |
| Motor replacement | $500 – $1,400 |
| Safety edge and sensor work | $200 – $800 |
In Gates, price climbs when frost-heaved posts need resetting before anything else can be corrected, and when a commercial operator has to be rated for high daily traffic. Every job is quoted before any work starts, so the price you agree to is the price on the invoice.
Neighborhoods We Serve in Gates
We cover Gates from the Buffalo Road corridor across to the Spencerport Road side, including the older compact lots where frost-heaved posts and racked steel gates are the standard spring call. The work is the same citywide, and the drive is short enough that free estimates get booked into the next opening. Whether the gate is on a post-WWII lot near the town center or a small commercial property on a main road, we treat the post line as the first thing to check.
- Buffalo Road corridor
- Spencerport Road area
- North Gates
- Elmgrove
- Coldwater Road area
Service Area – Cities Near Gates
Gates sits right against Rochester, so we cover the surrounding towns the same way. If your gate is in North Gates, NY, just over the town line into Rochester, NY, out toward Greece, NY, or west around Spencerport, NY, we can get a free estimate to you. Call (866) 942-8010 and we’ll confirm coverage for your address and book the visit.
Serving Gates, NY – Our Local Coverage Area
We serve Gates and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Company in Gates
We answer 24/7. Fast dispatch, 7am-7pm, Sunday through Friday, and Gates is close enough to Rochester that most repair calls get same-day service. Call (866) 942-8010 for a free estimate.
Most cities require a permit for a new fence or gate, so ask the Town of Gates building department and check your HOA rules before work starts. We’ll tell you what the installation involves so you know what to ask.
Yes. We handle both residential gates and commercial access-control systems on the small commercial lots along the main corridors. Call (866) 942-8010 and we’ll set up a free estimate for your property.
If your gate has stopped latching, your operator has quit, or you’re planning a new install on a compact Gates lot, call (866) 942-8010 for a free estimate. We’ll confirm the site visit and give you a written price before any work begins.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within 30-60 min.
- 4You approve before work beginsNothing starts until you say go.
What Gates Customers Say
"Repair is holding. He was quite a bit later than the window I was given, and nobody called me about it, I had to call them. The work itself was done well once he got here."
- Oscar Torres"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."
- Beatriz Flores"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."
- Ryan Miller